Craftmade TCS Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Fernbedienungen Craftmade TCS herunter. Installation Sheet Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 14
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Installation Instructions
Instrucciones de instalación
Instructions d’installation
BL52
Bloom Ceiling Fan
Seitenansicht 0
1 2 3 4 5 6 ... 13 14

Inhaltsverzeichnis

Seite 1 - Bloom Ceiling Fan

Installation InstructionsInstrucciones de instalaciónInstructions d’installationBL52Bloom Ceiling Fan

Seite 2 - Trouble Shooting

Lift fan onto the mounting bracket (#1). Turn housing until hanging ball seats itself into ball socket (listen for click).WARNING: To reduce the risk

Seite 3 - What You Have

White (Neutral)GroundWhiteBlackWireConnectors (S6)Ground(Green)Blue Black (Power)Outlet BoxGround (Green)Downrod Ground(Green)Mounting BracketGround (

Seite 4

Attach canopy (3) to the mounting bracket by placing screws (S2) into slot in canopy. Twist clockwise to lock into place. Seat the canopy screw cover

Seite 5

Slide the small pedal blades into place, support andattach with screws. (S4)Screw in candelabra light bulbs. (not included)Place light kit glass over

Seite 6

ON/OFF For emergency shut off.HIGH Controls fan motor speed. To select desired speed, press MEDIUM button once and release.LOW REVERSE Controls

Seite 7

Trouble ShootingProblem A: Fan Will not Start Remedies: 1. Check fuse or circuit breaker and replace if necessary 2. Turn off electrical power

Seite 8

Before Assembly1. Make sure that the fan voltage (120) is compatible with your own electrical system.2. Check to make sure that your c

Seite 9

Turn off circuit breakers and wall switch to the fan supply line leads. 30”84”IMPORTANT: If using the angle mount method, check to make sure the ceilin

Seite 10

OUTLET BOXOutlet Box (A)Mounting Bracket (1)Bracket Screws & Washers (S3)Support BeamWood Screws (S1)Canopy Screws (S2)CeilingWood Screws (S1)“J”

Seite 11

Unscrew and remove motor housing washer and motor housing top plate. Attach Large Pedal Blades from Top of Motor Housing.5

Seite 12

Reattach the Motor housing Plate and Motor Housing Washer as shown.Make sure the antenna wire is threaded through hole on top of motor housing.Downrod

Seite 13

Tighten set screw (A) against downrod.Insert safety bolt (S7) through flange & downrod and attach nut. Tighten firmly.read the downrod onto the mot

Seite 14

Place flange cover (4) over downrod assem-bly. Attach antenna wire to flange cover. Place canopy screw cover over downrod. Place canopy (3) over downro

Kommentare zu diesen Handbüchern

Keine Kommentare